
Fence Replacement & Removal in Oklahoma City
Many older fences across Oklahoma City's post-war residential grid were never set below the frost line, leaving them vulnerable to settling, leaning, and eventual failure. When a fence reaches the end of its service life, you have two paths: repair what can be salvaged, or remove the old line entirely and install a new one built to last. Fence replacement in Oklahoma City means hauling off the deteriorated structure, clearing the line, and setting new posts and materials sized for the local clay and wind exposure. We work through every neighborhood in Oklahoma City, Moore, Norman, Edmond, and surrounding areas, removing what's worn and installing fencing that will hold. Our approach is straightforward: assess what's there, propose repair or replacement based on what makes sense for your budget and timeline, and execute the work with the same crew from start to finish. If you're ready to move forward, call us at (405) 813-5285 for a free estimate, or visit our contact page to request service.
Why Fence Replacement Matters in Oklahoma City
A fence that leans, sags, or shows rotted posts at the base is no longer doing its job. It won't hold a gate properly, won't contain pets or children reliably, and won't screen your yard from neighbors or the street. Replacement becomes the practical choice when repair costs approach or exceed the price of a new fence, or when the structure is too far gone to justify the labor. In Oklahoma City's diverse neighborhoods, from the older central grid to newer master-planned communities in areas like The Village and Nichols Hills, fence condition varies widely, but the underlying problem is consistent: posts set in shallow holes or tamped soil without concrete eventually fail under wind load and ground movement.
- We remove the old fence line completely, including posts, rails, and any concrete footings that remain.
- We haul away all debris and dispose of it responsibly, leaving your property clear.
- We locate existing utilities using Oklahoma 811 before digging any post holes, protecting underground lines.
- We set new posts in concrete at proper depth and spacing, then install your choice of material: wood, vinyl, chain link, or ornamental metal.
- We verify setback and height compliance with your local building department and any HOA architectural standards that apply to your property.
Replacement gives you a fresh start with a fence built to current standards and your preferred material and style.
Key info: Many neighborhoods in Oklahoma City, Yukon, and Mustang have different setback and height rules. We verify requirements with your city or county building department and work within any deed restrictions or HOA guidelines before we break ground. Your property line is your responsibility to identify. We install on the line you mark, and recommend working from an existing survey if one is available.
For detailed guidance on what applies to your specific address, contact the Oklahoma City Planning Services office or your local municipal building office.
How We Remove and Replace a Fence in Oklahoma City
The process begins with a site visit where we photograph the existing fence, measure the line, identify any obstacles, and discuss your goals for the replacement. We then provide a written estimate that covers removal, hauling, new materials, labor, and installation. Once you approve, we schedule the work, pull any required permits, and execute the removal and installation in sequence. The timeline depends on fence length, material choice, and site conditions, but most residential jobs complete within one to three weeks from start to finish.
- We conduct a free site assessment and provide a detailed written estimate with all costs itemized.
- We call Oklahoma 811 to locate utilities and mark safe zones for digging.
- We remove the old fence line, cut posts at ground level, extract footings, and haul all debris away.
- We set new posts in concrete at proper depth, typically 2 to 3 feet depending on post size and soil conditions.
- We install rails, pickets, boards, or panels according to your chosen material and design, ensuring posts are plumb and spacing is consistent.
- We apply any finish or stain if you've selected a wood fence, or leave vinyl, chain link, or metal ready for use.
Throughout the process, we keep the work site clean and address any questions you have about progress or next steps.
Example: A homeowner in Del City had a 140-foot cedar fence installed in 1998 with posts set in tamped soil. After 20 years, several posts leaned noticeably and two pickets cracked. We removed the old line, set new pressure-treated posts in concrete, and installed a new cedar fence with board-on-board construction. Total time: two weeks. Cost was higher than a repair would have been, but the new fence carries a warranty and will serve another 15 to 20 years.
Learn more about material options by exploring our vinyl fence installation and wood privacy fence installation pages.
Removal and Replacement Methods
| Approach | Description | Best for |
|---|---|---|
| Full removal and new installation | We remove all old materials, set new posts in concrete, and install a complete new fence with your choice of wood, vinyl, chain link, or metal. | Fences beyond repair, major style or material changes, or when posts are unstable or rotted at the base. |
| Post replacement with existing rails | We remove only the failed posts, set new ones in concrete, and reuse rails and pickets if they remain sound. | Selective post failure while rails and boards are still serviceable; faster and lower cost than full replacement. |
| Partial line removal and extension | We remove a section of fence and extend the line with new materials, matching the existing style or upgrading to a new one. | Property boundary changes, additions to the fenced area, or repair of one section while keeping the rest of the line. |
| Removal only, no replacement | We remove the entire fence structure, haul debris, and clear the line for future use or landscaping changes. | Property sales, major landscaping redesigns, or when a fence is no longer needed or wanted. |
Fence Replacement & Removal Cost in Oklahoma City: What to Expect
The cost of fence replacement in Oklahoma City depends on several factors: the length of the fence line, the material you choose (wood, vinyl, chain link, or ornamental metal), the condition of the existing structure, site access, and whether the old posts were set in concrete or just tamped soil. A straightforward removal and replacement of a 100-foot wood privacy fence typically starts around $2,200 to $3,500, while vinyl or chain link in the same length may run $2,800 to $4,200. Ornamental metal or specialty designs cost more. The single largest variable is material choice; the second is whether old concrete footings must be excavated or can be left in place.
We recommend getting two or three estimates from contractors you trust. Each should itemize removal, hauling, post setting, materials, labor, and any permits. This comparison will show you where costs differ and why. If one quote is significantly lower than others, ask what's being omitted; if one is much higher, ask what's included that the others are not.
For a detailed breakdown of pricing by material and scope, visit our full pricing page. Call us at (405) 813-5285 for a free estimate on your specific project.
Fence Replacement & Removal Near Me: What Oklahoma City Homeowners Should Know When Hiring
Finding a fence contractor you can trust starts with verifying that they are fully insured and have been in business long enough to stand behind their work. Ask for references from recent projects in your neighborhood or a similar setting, and call at least two of them. A good contractor will provide a written estimate, explain the process clearly, and answer your questions without pressure. In Oklahoma City and surrounding areas, many neighborhoods have HOA requirements or local setback and height rules, so confirm that your contractor knows how to navigate these before digging. If your property has deed restrictions or you live in a master-planned community like Nichols Hills or The Village, the contractor should verify compliance with your HOA before beginning.
- Check that the contractor is fully insured and can provide a certificate of insurance on request.
- Ask for at least two references from fence replacement or removal work done within the past two years.
- Verify that the contractor will call Oklahoma 811 before digging and can explain why utility locates are required by law.
- Confirm that the contractor knows your local building department's setback, height, and material rules and will verify them before installation.
- Request a written estimate that breaks down removal, materials, labor, and any permit fees separately.
- Avoid contractors who pressure you to decide immediately or who offer unusually low prices without clear explanation of what's included.
We have been in business since 2009 and are an AFA Member Installer with the American Fence Association. We handle fence replacement and removal across Oklahoma City, Edmond, Moore, Norman, Midwest City, Del City, Yukon, Mustang, and surrounding areas. To discuss your project and get a free estimate, contact us today or call (405) 813-5285.
Fence Replacement & Removal in Oklahoma City: Pricing Guide
| Service | Price | Details |
|---|---|---|
| Fence removal only (per linear foot) | Starting at $8 | Includes hauling debris; price increases if concrete footings must be excavated or site access is limited |
| Removal and wood privacy fence installation (per linear foot) | Starting at $22 | Includes removal, new pressure-treated posts set in concrete, cedar or pressure-treated boards, and basic finishing; total job typically 100 to 200 feet |
| Removal and vinyl fence installation (per linear foot) | Starting at $28 | Includes removal, vinyl posts and panels, hardware, and installation; vinyl requires no stain or sealant and carries longer warranty than wood |
| Removal and chain link fence installation (per linear foot) | Starting at $14 | Includes removal, galvanized or powder-coated steel posts, tension bands and stretcher bar, and mesh; most economical option for large areas or commercial properties |
| Removal and ornamental metal fence installation (per linear foot) | Starting at $35 | Includes removal, aluminum or steel pickets and rails, powder-coated finish, and installation; material and design complexity drive cost within this range |
| Free estimate and site assessment | No charge | Response within 24 hours; covers measurement, photo documentation, utility locate, and written proposal with all costs itemized |
Indicative pricing, the exact cost depends on square footage, finish, and site access. Free personalized estimate within 24h at (405) 813-5285.